Located above for your convenience, we have provided a downloadable PDF information package for this specific product.

CONTINUED...

High performance processing also leads to powerful networking features and versatile digital audio functionality. In fact, VM Series can handle jobs that range from a single stand-alone control panel, to a sophisticated network comprising as many as eight control panels processing data from up to 4,000 devices.

High quality voice evacuation also delivers system design flexibil- ity with scalable implementation from simple Place-of-Assembly capability right up to multi-channel operation for highrise and cam- pus applications. VM Series features three channels of integrated digital audio. Its optional paging control center includes a high quality paging microphone to which can be added a firefighters’ telephone.

VM Series makes all this new technology readily accessible with easy installation and maintenance. Electronic addressing means devices virtually install themselves, while intuitive installation and detailed diagnostic tools offer a clear and rapid path to flawless system operation.

Standard Features
• One Class A or Class B intelligent device loop standard, option- al second loop brings control panel capacity to 500 devices
• 24-line by 40-character backlit LCD capable of displaying eight simultaneous events
• Optional voice evacuation and firefighter’s telephone
• Three Form C relays: alarm, trouble and supervisory
• Optional network interface slots are located on the back of a swingable mounting chassis
• Electronic addressing with automatic device mapping
• Optional Ethernet port for diagnostics, programming
• Supports system wide strobe synchronization
• Supports up to 30 R-Series remote annunciators with either Class A or Class B wiring
• Networkable up to eight VM control panels monitoring 4,000 intelligent points
• Patented Voltage Boost™ technology delivers constant voltage on NAC and AUX circuits — even at low battery power.
• 10 Amp UL listed power supply with universal 94 to 264 Vac input voltage
• Four on-board Notification Appliance Circuits
• Room for three optional front panel LED/Switch modules
• Optional Ethernet interface
• Hinged chassis for easy access
• Removable terminals on all low voltage wiring

Collapse this section

Located above for your convenience, we have provided a downloadable PDF information package for this specific product.

CONTINUED...

This life safety system features an attractive contemporary design that fits with any decor. Its gently curved doorfront offers a distinc- tive flair with available red or silver finishes. Controls are discreetly inset behind a striking black bezel.

The VS2 supports a wide range of accessories and related equip- ment, including:
• Intelligent modules, detectors, and bases
• R-Series remote annunciators
• option cards that expand system capacity and extend system capabilities.

Features
• Comes standard with one loop (expandable to two) that supports up to 250 (expandable to 500) intelligent devices: each VS2 loop supports up to 125 detectors and up to 125 modules.
• Four Class B NACs or two Class A NACs.
• Form C contacts for alarm and trouble, Form A for supervisory
• Electronic addressing with automatic device mapping
• Optional Ethernet port for diagnostics, programming and a variety of system reports
• Two programmable switches with LEDs and custom labeling
• Supports Genesis horn silence over two wires and UL 1971-compliant strobe synchronization
• Supports up to eight serial annunciators, (LCD, LED-only, and graphic interface).
• Can use existing wiring for most retrofit applications
• Supports V-Series single and multisensor detectors
• Upload/download remotely or locally
• Two-level maintenance alert reporting
• Pre-alarm and alarm verification by point
• Adjustable detector sensitivity
• 4 x 20 character backlit LCD display

Collapse this section

Located above for your convenience, we have provided a downloadable PDF information package for this specific product.

CONTINUED...

This life safety system features an attractive contemporary design that fits with any decor. Its gently curved doorfront offers a distinctive flair with available red or silver finishes. Controls are discreetly inset behind a striking black bezel.

The VS1 supports a wide range of accessories and related equipment, including:
• Intelligent modules, detectors, and bases
• R-Series remote annunciators
• Option cards that expand system capacity and extend sys- tem capabilities.

Features
• Comes standard with one loop that supports up to 64 intelligent devices of any type and two Class B NACs.
• Form C contacts for alarm and trouble, Form A for supervisory
• Electronic addressing with automatic device mapping
• Optional Ethernet port for diagnostics, programming
• Supports systemwide strobe synchronization
• Two programmable switches with LEDs and custom labeling
• On board NACs support Genesis horn silence over two wires and UL 1971-compliant strobe synchronization
• Optional Class A wiring
• Supports up to eight serial annunciators, (LCD, LED-only, and graphic interface).
• Can use existing wiring for most retrofit applications
• Supports V-Series single and multisensor detectors
• Upload/download remotely or locally
• Two-level maintenance alert reporting
• Pre-alarm and alarm verification by point
• Adjustable detector sensitivity
• 4 x 20 character backlit LCD display

Collapse this section

Located above for your convenience, we have provided a downloadable PDF information package for this specific product.

CONTINUED...

FSP502 and FSP1004 panels support Class A operation by combin- ing pairs of on-board initiating curcuits (IDCs) or notification circuits (NACs) to provide the necessary Class A circuits. For example, the FSP1004 comes factory set to support 10 Class B IDCs and four NACs. But it can be field-configured to provide five Class A IDCs, no Class B IDCs, and two Class A NACs – or any other combination of circuits that fall within the circuit-pairing parameters.

Standard Features
• Available in 3, 5, and 10 IDC models
• IDC or NAC pairs convertible to single Class A circuits (10 and 5 IDC panels only)
• CleanMe® provides remote annunciation if a detector drifts out of UL/ULC limits reducing the chance of a false alarm
• Combination Waterflow and Supervisory IDCs reduces wire and zone counts
• NACs programmable by zone and individually selectable for Genesis, continuous, temporal outputs, or coded
• Front panel programmable simplifies installation and servicing
• Optional fully integrated DACT/Dialer for PC programming
• Genesis option allows precision synchronization and audible silence over two wires without additional modules
• On-board relays for Alarm, Supervisory and Trouble
• Optional serial bus relay modules are programmable for common or zone activation
• Optional serial bus remote annunciator family
• One person walk-test (audible or silent)
• Expandable power supply on 10 IDC panel reduces booster power costs
• Trim ring available for semi-flush mounting
• Supports 2M, "EC", 6200, 400, 500 and 700 series detectors

Collapse this section

Located above for your convenience, we have provided a downloadable PDF information package for this specific product.

CONTINUED...

The GSA-CRR/MCRR Polarity Reversal Relay Module provides a Form "C" dry relay contact to power and activate a series of GSA-AB4G Audible Sounder Bases. Upon command from the Signature loop controller, the GSA-CRR reverses the polarity of its 24 Vdc output, thus activating all Sounder Bases on the data loop.

Standard-mount versions (GSA-CR and GSA-CRR) are installed to standard North American 1-gang electrical boxes, making them ideal for locations where only one module is required. Separate I/O and data loop connections are made to each module.

Plug-in UIO versions (GSA-MCR and GSA-MCRR) are part of the UIO family of plug-in Signature Series modules. They function identically to the standard mount versions, but take advantage of the modular flexibility and easy installation that characterizes all UIO modules. Two- and six-module UIO motherboards are available. All wiring connections are made to terminal blocks on the motherboard. UIO assemblies may be mounted in Edwards enclosures.

Standard Features
• Provides one no/nc contact (GSA-CR/MCR)
• Allows group operation of sounder bases
• Plug-in (UIO) or standard 1-gang mount
• Automatic device mapping
• Electronic addressing
• Intelligent device with microprocessor
• Ground fault detection by address

Collapse this section

Located above for your convenience, we have provided a downloadable PDF information package for this specific product.

CONTINUED...

The GSA-UM is installed to a standard North American 2-gang electrical box, making it ideal for locations where only one module is required. Separate I/O and data loop connections are made to each module. The GSA-UM may be used to connect any one of the following:
• two Class B or one Class A Initiating Device Circuits
• one Class A or B Notification Appliance Circuit
• one Class A or B Circuit for 2-wire Smoke Detectors
• one Form “C” (NO/NC) Dry Output Contact Relay

The GSA-MAB is part of the UIO family of plug-in Signature Series modules. It takes advantage of the modular flexibility and easy installation that characterizes all UIO modules. Two- and six- module UIO motherboards are available. These can accommodate individual risers for each on-board module, or shared risers in any combination with their UIO modules. All wiring connections are made to terminal blocks on the motherboard. UIO assemblies may be mounted in Edwards enclosures. The GSA-MAB may be used to connect any one of the following:
• one Class B or one Class A Initiating Device Circuit
• one Class A or B circuit for 2-wire Smoke Detectors
• one Class A or B Notification Appliance Circuit

Standard Features
• 15 modules in one
• Plug in (UIO) or standard 2-gang mount
• Automatic device mapping
• Electronic addressing
• Intelligent device with microprocessor
• Non-volatile memory
• Stand-alone operation
• Ground fault detection by address
• High ambient temperature operation
• Designed to ISO 9001 standards

Collapse this section

Located above for your convenience, we have provided a downloadable PDF information package for this specific product.

CONTINUED...

Vigilant’s double action single stage GSA-M278 station is a con- temporary style manual station made from durable red colored lexan. To initiate an alarm, first lift the upper door marked "LIFT THEN PULL HANDLE", then pull the alarm handle.

Standard Features
• Traditional familiar appearance
• One stage (GA), two stage (pre-signal), and double action models
• Break glass operation
• Intelligent device with integral microprocessor
• ADA Compliant
• Electronic Addressing with Non-volatile memory
• Automatic device mapping
• Stand-alone operation
• Diagnostic LED's
• Designed for high ambient temperature operation

Note: Some features described here may not be supported by all control systems. Check your control panel’s Installation and Operation Guide for details.

Collapse this section

Located above for your convenience, we have provided a downloadable PDF information package for this specific product.

CONTINUED...

The GSA-UIO2R provides mounting and wiring terminations for up to two UIO modules, and the GSA-UIO6R provides mounting and wiring terminations for up to six UIO modules. Both mother- boards feature a riser #1 input and a riser #2 input bus. Jumpers on riser #1 input, between modules, facilitate sharing a single riser among more than one module. This significantly reduces wiring requirements. Removing the jumpers provide separate riser inputs to each adjacent module. Riser #2 input is fixed to each module position and cannot be split.

The GSA-UIO6 provides mounting and wiring terminations for up to six UIO modules. This motherboard provides two riser inputs that are common to all modules.

Standard Features
• Modular flexibility
• Minimum wiring requirements
• Easy installation
• Supports automatic device mapping
• Supports intelligent devices
• Twisted or shielded wire not required
• Supports electronic addressing

Collapse this section

Located above for your convenience, we have provided a downloadable PDF information package for this specific product.

CONTINUED...

Thanks to patented breakthrough technology, Genesis strobes do not require bulky specular reflectors and lenses. Instead, an exclusive cavity design conditions light to produce a highly controlled distribution pattern. Significant development efforts employing this new technology have given rise to a new benchmark in strobe performance – FullLight technology.

FullLight strobe technology produces a smooth light distribution pattern without the spikes and voids characteristic of specular reflectors. This ensures the entire coverage area receives consistent illumination from the strobe flash. As a result, Genesis strobes with FullLight technology go well beyond the minimum UL-required "cross" pattern.

Depending on the model, Genesis horn-strobes feature 15 to 95, or 95 to 177 candela output (see ordering information), which is selectable with a conveniently-located switch on the front of the device. The candela output setting is clearly visible even after final installation, yet it remains locked in place to prevent unauthorized movement after installation.

Genesis horn-strobes feature textured housings in architecturally neutral white or eye-catching fire alarm red. An ingenious iconographic symbol indicates the purpose of the device. This universal symbol is code-compliant and is easily recognized by all building occupants regardless of what language they speak. Models with "FIRE" markings are also available.

Standard Features
• Field configurable – no need to remove the device!
• Unique low-profile design
• Easy to install
• Unparalleled performance

Collapse this section

Located above for your convenience, we have provided a downloadable PDF information package for this specific product.

CONTINUED...

FullLight strobe technology produces a smooth light distribution pattern without the spikes and voids characteristic of specular reflectors. This ensures the entire coverage area receives consistent illumination from the strobe flash. As a result, Genesis strobes with FullLight technology go well beyond the UL-1971 and ULC-S526 light distribution requirements.

Genesis strobes and horn-strobes offer 15 to 110 candela output, which is selectable with a conveniently-located switch on the side of the device. Models are also available that offer fixed 15/75 cd output. The candela output setting remains clearly visible even after final installation, yet it stays locked in place to prevent unauthorized tampering.

Genesis MNEC appliances offer emergency signaling with clear or amber lenses and with optional ALERT housing labels. They are ideal for applications that require differentiation between fire alarm and mass notification alerts.

Standard Features
• Unique low-profile design
• Four field-configurable options in one device
• Fixed 15/75 cd model available
• MNEC models available
• Easy to install
• Unparalleled performance

Collapse this section

Located above for your convenience, we have provided a downloadable PDF information package for this specific product.

CONTINUED...

A bright, easy-to-see LED flashes red when the detector is in alarm, thus eliminating much of the guesswork when responding to front-panel indications.
• The V-HFD is fixed-temperature heat detector with an alarm threshold of 135° F (57°C).
• The V-HRD is a rate-of-rise heat detector calibrated for 15°F (8°C) per minute.
• The V-PHS houses an optical sensing chamber that detects smoke, as well as a fixed-temperature sensor that detects heat. The detector analyzes data from both sensors to deter- mine when an alarm is initiated.
• The V-PS houses an optical sensing chamber that detects smoke.

All detectors feature comprehensive self-diagnostic capability. V-PS and V-PHS optical detectors continuously adjust their sensitivity to compensate for changes in the environment such as the presence of dirt, smoke, temperature, and humidity. These detectors issue a dirty sensor warning when they reach their preset limit.

Standard Features
• Optical, heat, and multisensor models available
• Compatible standard, relay, isolator, and audible bases
• Field replaceable optical chamber
• Electronic Addressing including mapping location
• Bases mount to standard North American two-gang or 4" square electrical boxes
• Dual color LED provides at-a-glance alarm indication
• Tamper-resistant feature
• Self diagnostic capability with on-board storage of results
• Optical detectors feature automatic rate compensated sensitivity adjustment, as well as dirty sensor warnings
• Manufactured to strict international ISO 9001 standards
• Assembled using surface mount technology for RF resistance
• Conformally coated components resist dust and humidity
• Automatic detector test
• Low Profile Design

Collapse this section

Located above for your convenience, we have provided a downloadable PDF information package for this specific product.

CONTINUED...

All annunciator models include status LEDs and an internal buzzer. Two models have an LCD text display, and one has 16 pairs of LEDs for zone annunciation. LCD models feature a large back-lit, four by twenty character per line, super-twist liquid crystal display.

R-Series annunciators and expanders are mounted on a standard 4-inch square electrical box, using the included mounting ring. They can also be surface mounted in locking steel enclosures. Three different enclosures are available.

A keyswitch and graphic annunciator interface is available for R-Series annunciator applications. The keyswitch enables or disables common controls. The graphic annunicator interface cards supports 32 LEDs and 16 switches on the graphic panel display.

Features
• LCD models feature large 4 x 20 character backlit LCD display
• LED models provide 16 pairs of LEDs for zone annunciation
• Available expander extends capability with 24 pairs of LEDs
• Up to two expanders may be wired to each annunciator
• Status LEDs and internal buzzer standard on all models
• Common controls available for LED and LCD display models
• Available keyswitch for disabling common controls
• Standard 4-inch square electrical box mounting
• Class B or Class A RS485 wiring standard
• One-, two-, and three-position enclosures available
• Graphic Annunciator interface, includes common control, indicators and 32 LEDs
• No programing required, set the address and unit recieves all information from panel

Collapse this section